Product Number: 5

Product: Quiet Floor recycled cotton underlament 1/8” thick (3’ x 33’)

Link to product spec page

Cost: $50.00 per roll ($.50 per square foot)

Quantity: 522 Rolls – (each roll is 3’ x 33’)

Condition: PERFECT

Description: This is a flooring underlament that is designed to go under tile or wood floor to help reduce the amount of sound that is transmitted to the floor below – it is NOT a finish floor. The standard price for this product is around $1.00 per square foot, we just have way too much of it in stock and need to make room for other product. There’s nothing wrong with the rolls at all.

Please see the product spec page by CLICKING HERE

Please see the installation instructions by CLICKING HERE

Click to Enlarge

Product Number: 14

Product: 2” Fabric Wrapped Fiberglass Baffles

(Fabric Facing: Hopscotch 2823 - # 026 Granite)

Link to product spec page

Cost: $ 380.00 (for both – we will not separate)

Quantity: 2 (6’ wide x 3’ tall) Baffles

Condition: Perfect. Nothing wrong – nothing at all. The customer canceled the order at the last minute. 70% off for you.

Description: These baffles are constructed by taking two pieces of 6-7lb density fiberglass and gluing them together on either side of four mounting points per baffle along one 6’ side. The fabric that was used for the facing is Guilford Hopscotch 2823 - # 026 Granite. If you want to see the fabric before you buy these, simply contact Guilford directly and ask them for the Guilford Hopscotch color card (616-554-2250). DO NOT TRUST the color that’s on your screen – it varies from one monitor to another.

There is one little “catch” or something you should know. Due to the size of these baffles, they will have to be shipped on a pallet – crated carefully in plywood. UPS or FedEx or DHL will not take them, they’re just too big. So, with that said, we will do our best to ship them to you at the lowest cost possible, but understand that the shipping will most likely be as much, or more than the cost of the baffles themselves. Don’t let this scare you, let us put a quote together based on where you want them delivered.

Click to Enlarge

Product Number: 19

Link to Product Spec Page

Link to similar product NRC Test Data

Cost: $62.40 per 4x8 panel – $1.95 per Square Foot

Quantity: 22 Panels

Condition: Very good, nearly perfect

Description: I’m not sure why these were made. I believe they were intended to be used behind the 9/16” WallMate high tension wall system, but I’m not sure. They are in good condition other than a few of the corners are a little bit beaten up simply from moving the skid around in the warehouse. We can ship a few panels at a time – but to do so we will roll them up and stick them in boxes. If you have questions or need any information about these panels, feel free to contact me.

Click to Enlarge

Product Number: 33

Product: ½ & ¼” Thickness Charcoal PEPP (2’x4’ and 2’x2’)

Link to product spec page

Cost: $250.00 for the box

Quantity: (7 count) 2’ x 4’ x ¼” thickness
(1 count) 2’ x 3’ x ½” thickness
(5 count) 2’ x 4’ x ½” thickness
(1 count) 2’ x 2’ x ½” thickness

Condition: PERFECT

Description: We had some of our 1” thick panels skive cut down and these are the prototype panels. There is nothing wrong with them – we have just decided not to market the ½” or ¼” thick panels. One side of the ½” panels has the “normal” facing of the PEPP as shown on the PEPP spec page (link above) the other side the beads are cut in half. Our model Mike shown in the second picture is not included.

Click to Enlarge

Product Number: 43

Product: 1” #6lb Marble Blue Echo Eliminator 12” x 12”

Link to Product Spec Page

Cost: $5.00 per panel

Quantity: 560 panels

Condition: Perfect

Description: A long time ago, in a world just upstairs from my office, an older sales guy decided to fabricate and market a product called Aco-U-Stick which was intended to be a do-it-yourself acoustical panel system. He had a bunch of our regular product cut down to 12” x 12” squares but didn’t have time to put the Velcro on the panels. The product never caught on, and the Velcro was never attached. There’s nothing wrong with these, they are not even dirty. They are just 12” x 12” squares of Marble Light Blue echo Eliminator.

Click to Enlarge