Product Number: 22

Product: 1” Thickness Charcoal PEPP (10 ½” x 18”) Panels

Link to Product Spec Page

Cost: $80.00 for the box

Quantity: (30 count) 10 ½” x 48” x 1” Thickness Charcoal panels – undamaged (drops)

Condition: PERFECT

Descriptions: These panels are drops from an order that needed to be cut down.

Click to Enlarge

Product Number: 24

Link to product spec page

Cost: $250.00 for the box.

Quantity: 1 full box – approx 112 square feet

Panel sizes vary, but most look to be 15” x 19”

Condition: PERFECT

Description: There is nothing wrong with these panels. They are drops from an order that we cut down. The cuts look to be really clean and straight. I didn’t have time to measure and count all of the panels, but most of them looked to be around 15” x 19”. Some might be bigger, some might be smaller. Either way, this is a really good deal for 112 square feet of product.

Product Number: 25

Product: 1” Thickness Charcoal PEPP (24” x 9”)

Link to product spec page

Cost: $250.00 for the box

Quantity: 75 pieces 24” x 9”

Condition: PERFECT

Description: There is nothing wrong with these panels. They are drops from an order that we cut down. The cuts look to be really clean and straight. I didn’t see any broken corners or visible damage, but I did not inspect every panel it the box.

Product Number: 26

Product: 1” Thickness Charcoal PEPP (6 3/4” x 38 ½”)

Link to product spec page

Cost: $150.00 for the box

Quantity: 48 pieces 6 ¾” x 38 ½”

Condition: PERFECT

Description: There is nothing wrong with these panels. They are drops from an order that we cut down. The cuts look to be really clean and straight. I didn’t see any broken corners or visible damage, but I did not inspect every panel it the box.

Product Number: 29

Product: 1” Thickness Charcoal PEPP (3 ¾” x 24”)

Link to product spec page

Cost: $.75 a piece ($245 if you take them all)

Quantity: 483 pieces 3 ¾” vs 48"

Condition: PERFECT

Description: There is nothing wrong with these panels. They are drops from an order that we cut down. The cuts look to be really clean and straight. I didn’t see any broken corners or visible damage, but I did not inspect every panel it the box.

Click to Enlarge