Product Number: 31

Link to product spec page

Cost: $6.00 per square foot (Full size panels are subject to a $50.00 packing fee due to the odd sizes)

(72” x 18” panels - $54.00)

(72” x 12” panels – 36.00)

(12” x 6” panels - $18.00)

(24” x 8” panels – $8.00)

Quantity: (3 count) 72” x 18” panels

(5 count) 72” x 12” panels (Some light damage)

(1 count) 72” x 6” panels

(1 count) 24” x 8” panels

Condition: PERFECT / Good

Description: These panels are drops from a larger order where we had 4’ x 8’ panels cut down to specific sizes. A few of the 72” x 12” panels have some slight damage to the corners, but it’s not that bad. *Please note the packing fee that is going to apply to any panel that is longer than 48” – just because we will have to make boxes for these panels – and we will only be able to ship two panels in each box. If you want us to cut them down, we would be happy to do that because then they will fit into our standard boxes.

Click to Enlarge

Product Number: 33

Product: ½ & ¼” Thickness Charcoal PEPP (2’x4’ and 2’x2’)

Link to product spec page

Cost: $250.00 for the box

Quantity: (7 count) 2’ x 4’ x ¼” thickness
(1 count) 2’ x 3’ x ½” thickness
(5 count) 2’ x 4’ x ½” thickness
(1 count) 2’ x 2’ x ½” thickness

Condition: PERFECT

Description: We had some of our 1” thick panels skive cut down and these are the prototype panels. There is nothing wrong with them – we have just decided not to market the ½” or ¼” thick panels. One side of the ½” panels has the “normal” facing of the PEPP as shown on the PEPP spec page (link above) the other side the beads are cut in half. Our model Mike shown in the second picture is not included.

Click to Enlarge

Product Number: 34

Product: 1” #3lb Marble Light Blue Echo Eliminator (2’x4’)

Link to product spec page

Cost: $18.00 each – ($180.00 for the lot)

Quantity: 12 (2’ x 4’) panels

Condition: PERFECT

Description: These panels are perfect, but are from an older die lot. We have a white nylon scrim on the back of the panels which we used to think helped them adhere to a wall or a ceiling. We’ve disproved this and no longer put the scrim on the back of the panels. Since they don’t match the rest of our inventory – someone hauled the box over to Bay 8, and there it sits.

Click to Enlarge

Product Number: 35

Product: 1” #6lb Marble Light Blue Echo Eliminator Panels with Grommets

Link to product spec page

Cost: $20.00 each – ($530.00 for the lot)

Quantity: 28 (2’ x 4’) panels

Condition: PERFECT

Description: I don’t know why these panels are in Bay 8, I didn’t see any damage at all. They would have gone back into inventory, but someone pounded silver grommets through the corners. These panels would not require any adhesive for mounting – one could use a screw or nail and mount them to the wall. Do you have a space that needs temporary treatment? Want some perfect panels that would be extremely to re-locate? Well, my friend, here they are.

Click to Enlarge

Product Number: 36

Product: 1” #6lb Marble Light Blue Echo Eliminator (2’x4’)

Link to product spec page

Cost: $18.00 each – ($175.00 for the lot)

Quantity: 11 (2’ x 4’) panels

Condition: PERFECT

Description: These panels are perfect, but are from an older die lot. Why are they in Bay 8 you ask? I don’t have an answer for you… I think you should buy them and see for yourself. They are from a different die lot than product #34, so they will not match perfectly.